Vented Hot Water

Get in touch

Traditional domestic hot water storage systems used in the United Kingdom are required to have an open vent pipe, hence the name Vented hot water systems. The vent pipe ran from the hot water storage vessel back to the cistern.

The head of pressure created by the Cold Water Storage (CWS) in the loft, means that in most cases the higher the tap or shower the lower the water pressure. Simply, the greater the distance from the Cold Water Storage to the tap or outlet, the greater the pressure. In many properties this is evident with poor showers in the upper floor bathrooms, but good pressure lower down in the property.

As the system is open to the atmosphere the cylinder MUST be located below the level of the Cold Water Storage tank.

To overcome this low pressure many people install either whole house pumps or shower pumps, however, with an open vented cylinder, this can draw air into the system – unless fitted correctly – which speeds up corrosion and increases system noise.

A traditional vented cylinder can be heated by various heat sources and typically this could be gas, oil, electric only, solar or any combination or the above.

Megaflo Unvented are fully qualified to install and maintain traditional vented hot water systems. In some cases, a traditional vented hot water system maybe more appropriate than an unvented hot water system.
Please feel free to contact Megaflo Unvented to discuss you requirements or to arrange an on-site survey.

Why Choose Us

At Megaflo Unvented, we do what we say we’ll do. Our integrity and competence values demand this. We are accountable for our words and actions, and that we deliver a service that meets or exceeds all expectations of quality and timeliness.

Customer service is our highest priority and to reinforce this, we adhere to the following guidelines:

Scroll to Top
Scroll to Top Call Now Button